Additive Manufacturing Materials for Demanding Applications

Highly glass-filled and extremely stiff material that is similar to glass and fiber-filled thermoplastics. Prints with a smooth, matte, polished finish and is highly resistant to heat and chemicals. Jigs, dies, and other tooling for processes like injection molding, thermoforming, or blow molding, as well as functional prototypes and end use parts requiring dimensional accuracy and stability under high temperatures and pressures.

High Temp Resin has a heat deflection temperature (HDT) of 238 °C @ 0.45 MPa — the highest among Formlabs resins. Precise prototypes and end use parts that require high thermal stability, such as molds and inserts, parts exposed to hot air, gas, and fluid flow, as well as heat-resistant mounts, housings, and fixtures.

A resilient material with strength, stiffness, and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts, and shattering. Create parts that balance stiffness and ductility, whether for compliant mechanisms or rugged enclosures with self-tapping screws and snap fits.

Rugged material with strength and stiffness comparable to ABS, combining toughness with high temperature and creep resistance. Excels in heavy-duty applications and delivers highly functional prototypes and end-use parts that resist shattering, deformation, and long-term wear. With a 79% elongation at break and a heat deflection temperature (HDT) of 70 °C, parts maintain structural integrity under mechanical and environmental stress.

Ductile, impact-resistant material with comparable strength, stiffness, and toughness to high-density polyethylene (HDPE), designed with exceptional wear and fatigue resistance for long-term toughness and utility. The 180% elongation at break (EAB) and Gardner impact strength of 128 in-lb surpass HDPE.

Glass-filled resin that is precise and offers similar stiffness to PEEK and PEKK thermoplastics. Prints with a smooth, matte, polished finish and is highly resistant to heat and chemicals. Stiff and strong engineering-grade prototypes, general load-bearing applications, and industrial parts that need to withstand significant load without bending.

Designed for investment casting, to directly print patterns that can be invested and cast. It has an extremely low thermal expansion, low ash, and no trace heavy metals. Paired with a latticing software, recommended for use with larger parts, excelling at producing geometries thicker than 3 mm.

Specialty UL 94 Blue Card certified material for creating self-extinguishing and halogen-free parts with favorable flame, smoke, and toxicity (FST) ratings. Tests and certifications include: UL 94 V-0 at 3 mm thickness; FAR 25.853 Appendix F, Part I; and ASTM E662.

Soft, translucent elastomer with a 50A Shore durometer ideal for prototyping and end-use parts normally produced with softer rubbers and silicones. Parts will bend, stretch, compress, and hold up to repeated cycles without tearing.

Flexible 80A Resin V2 is a resilient 3D printing elastomer that rivals the look, feel, and function of 80A cast urethanes, TPUs, and hard rubbers. Create tear-resistant functional prototypes and end use parts, protect sensitive components with soft inserts and fixtures, or design refined padding and grips with tack-free surfaces and a matte, black finish. Delivering 2x higher tear strength, 2x higher elongation at break, 4x higher rebound, and improved aesthetics and aging compared to the previous version.

Impact-resistant and lubricious material for squeezable parts and low-friction assemblies. Robust and have low friction, with similar strength and stiffness to polyethylene (PE) and a coefficient of friction comparable to Delrin® (POM).

Specialty material for producing custom ESD-safe prototypes and production tooling to increase operational efficiency and improve the yield of electronics manufacturing lines. Static-dissipative with high modulus and impact strength similar to ABS.

Print parts in colors that represent your brand, product line, or creative vision with accuracy and consistency. Choose any color to closely match final parts without painting, coating, or pigment mixing. Each order is custom-manufactured and quality checked.

Exceptionally versatile General Purpose Resin, offering an optimal balance of fast print speed, high accuracy, presentation-ready appearance, strong mechanical properties, and an easy, reliable workflow. Grey Resin has a rich, matte color that captures fine features accurately.

Exceptionally rich, deep black General Purpose Resin, offering an optimal balance of fast print speed, high accuracy, presentation-ready appearance, strong mechanical properties, and an easy, reliable workflow. Black Resin has a rich, matte shade that captures fine features accurately.

Exceptionally clear and color-neutral 3D printing resin, offering an optimal balance of fast print speed, high accuracy, transparency, strong mechanical properties, and an easy, reliable workflow. Create parts that are stiff and strong with a smooth surface finish that rivals acrylic.

An exceptionally bright white General Purpose Resin, offering an optimal balance of fast print speed, high accuracy, presentation-ready appearance, strong mechanical properties, and an easy, reliable workflow. White Resin has a bright, matte shade that captures fine features accurately.

High-accuracy material for creating restorative models with >99% of printed surface area within 100 μm of the digital model. Create beautiful models with crisp margin lines thanks to high opacity, beige color, and a smooth, matte finish to capture fine details.

20% wax-filled material for casting that can capture intricate features and offers a smooth surface finish for accurate castings with zero ash content and clean burnout. Ideal for ultrafine structures in jewelry and highly accurate patterns for casting and pressing dental prosthetics.

Nylon 12 Tough Powder offers the best-in-class refresh rate among Nylon powders, high ductility, and great dimensional accuracy across the build chamber. Print more durable parts for prototyping and small batch production that have reduced warpage without sacrificing strength. Dimensionally accurate and highly ductile functional prototypes and end-use parts with reduced warpage.

Combining all of the great qualities of general purpose, biocompatible Nylon 12 Powder with the customizability of white parts. Create medical devices and models with high contrast and detail or create functional prototypes that can be easily dyed to suit the application. Nylon 12 White powder offers a clean and professional finish, which more closely matches the color and texture of MJF produced parts than traditional SLS printed parts.

General purpose, versatile, and biocompatible material with high detail and great dimensional accuracy. As the go-to material for SLS 3D printing, it is ideal for both functional prototyping and end-use production of complex assemblies and durable parts with high environmental stability. With high tensile strength and environmental stability, Nylon 12 Powder is suitable for creating complex assemblies and durable parts with minimal water absorption.

A tough elastomer with high elongation at break and superior tear strength for flexible, resilient, and skin-safe prototypes and end-use parts. It is ideal for flexible functional parts that withstand the demands of everyday use. Leverage TPU 90A Powder's exceptional strength and flexibility to bring your products to market faster or transform patient care.

Carbon fiber-filled material, perfect for applications that require both superior stiffness and strength. Produce lightweight, rigid parts that remain structurally and thermally stable and can sustain repeated impact. Nylon 11 CF Powder is our highest performance material for SLS. Choose this material for parts that need to be strong, lightweight and stable over time, even at elevated temperatures.

A glass-filled, biocompatible material with enhanced stiffness and heat resistance for demanding industrial environments. Choose this material to produce stiff functional prototypes or end-use parts for applications where structural rigidity and thermal stability are critical. With its high Modulus and thermal stability, Nylon 12 GF Powder is the high-performance alternative to create functional validation prototypes for composite materials or stable end-use parts that will endure demanding conditions.

Strong and highly ductile bio-based material. It is ideal for robust biocompatible parts, functional prototyping, and producing custom or low volume end-use parts that need to bend or take impact. Nylon 11 Powder parts can handle wear and tear over time. For higher performance functional prototyping and end-use products that can take an impact and keep going, choose Nylon 11 Powder.

Nano-ceramic filled biocompatible material with enhanced aesthetics, mechanical properties, and validated longevity to guarantee optimal clinical performance. 3D print denture teeth, temporary full-arch implant-supported restorations (All-on-X appliances), and temporary single units.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Firm, flexible, and transparent material for biocompatible applications requiring durability and long-term skin (>30 days) or short-term mucosal membrane contact (<24 hours).

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Soft, elastic, and transparent material for biocompatible applications requiring comfort and long-term skin (>30 days) or short-term mucosal membrane contact (<24 hours).

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Class I biocompatible material with enhanced flexibility, strength, translucency, and color to guarantee optimal clinical outcomes. 3D print flexible and tear-resistant translucent trays and guides that save you time and deliver consistent, predictable outcomes.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Long-term biocompatible material for directly 3D printing flexible occlusal splints and night guards in-house, more easily than ever. Printed appliances are easily polished to high optical transparency, and offer enhanced comfort and durability.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Biocompatible applications requiring impact, shatter, and abrasion resistance, as well as long-term skin (>30 days) and mucosal membrane (>30 hours) or short-term tissue, bone, and dentin contact (<24 hours).

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Rigid, matte material for biocompatible applications requiring long-term skin (>30 days) or short-term mucosal membrane contact (<24 hours); compatible with common solvent disinfection and sterilization methods.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Strong, stiff material for biocompatible applications requiring long-term skin (>30 days) or short-term bone, tissue, dentin, and mucosal membrane contact (<24 hours). Compatible with common solvent disinfection and sterilization methods.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Rigid material for biocompatible applications requiring long-term skin (>30 days) or short-term bone, tissue, dentin, and mucosal membrane contact (<24 hours); compatible with common sterilization methods.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Long-term biocompatible material. Highly durable and resistant to fracture, this color-corrected material prints clear, polishes to high optical transparency, and resists discoloration over time.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Fast-printing biocompatible material used to directly print custom impression trays for implants, dentures, crowns and bridges, and other comprehensive cases. Digitally manufactured impression trays provide consistent, accurate impressions for high-quality dentistry.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Autoclavable, biocompatible resin for 3D printing surgical guides, drilling templates, pilot drill guides, and device sizing templates that exceed dental demands in accuracy, part quality, and performance.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.

Transparent, hard, strong, and wear-resistant material for biocompatible applications requiring long-term skin (>30 days), breathing gas pathways, and mucosal membrane contact (>30 hours) or short-term bone, tissue, and dentin (<24 hours). USP Class VI certified.

Note: All Biomed, Medical, and Dental resins are manufactured in an FDA registered facility in Ohio. These materials are designed and manufactured within a robust QMS that is ISO 13485 and EU MDR Certified. A dedicated team of operators and quality assurance professionals make the resins inside a certified ISO Class 8 clean room.